baner
Strona główna > Salon wystawowy
50w Ul Tuv Ccc Ce Dimmable Constant Current Led Lighting Drivers With Scp Ocp Ovp Otp

50w Ul Tuv Ccc Ce Dimmable Constant Current Led Lighting Drivers With Scp Ocp Ovp Otp

Sterownik LED Mean Well z serii LDC-80 to sterownik LED o mocy 80 W, obsługujący napięcie prądu przemiennego i stałego oraz umożliwiający regulację jasności, wyposażony w tryb stałej mocy wyjściowej. Sterownik LED LDC-80 działa w zakresie napięcia wejściowego od 180 do 295 V AC, a prąd wyjściowy można regulować w zakresie od 700 mA do 2100 mA.

Wyślij zapytanie

As a professional manufacturer of panele oświetleniowe do sufitów podwieszanych, acrylic light panels, superjasne taśmy LED, our company has domestic first-class technical strength, coupled with advanced equipment and strict quality management system, which effectively guarantees product performance and quality. We are guided by market demand to meet the needs of profit-related parties and are our driving force. We always firmly believe that the development of an enterprise must have a broad vision, a continuous spirit of innovation, and timely adjustment of development strategies according to market needs.

Regulator jasności LED MeanWell

Mean Well LDC-80 series LED driver is a 80W AC/DC dimmable LED driver featuring the constant power mode output. LDC-80 LED driver operates from 1 80~295VAC and output current can be adjusted between 700mA to 2100mA.

Meanwell 80W dimmable LED driver

Thanks to the efficiency up to 90%, with the fanless design, the entire linear LED driver series is able to

operate for -25°C~+85C case temperature under free air convection. LDC-80 Mean Well LED driver is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.


Cechy:

Constant power mode output

Metal housing design

Full Power at 70~1 00% max Current

Built-in active PFC function

Flicker Free design

No load / Standby power consumption <0.5W

Output current level pre-settable

Function options:3 in 1 dimming (dim-to-off); DALI interface, push dimming

Typical lifetime> 50000 hours

SELV and Isolated Class 2 power supply

5 years warranty


Mechanical Specification

LDC-80


Dimming Operation

※ 3 in 1 dimming function(for B-Type)

●Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0~ 10VDC, or 10V PWM signal or resistance.

●Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.

●Dimming source current from power supply: 100μA(typ.)

Note:

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.

2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

3. To ensure the dimming performance at low dimming level,output current must be over 80mA.


DALI Interface

◎PUSH dimming(primary side)

ActionAction durationFunkcja
Short push0.1~1 sec.Turn ON-OFF the driver
Long push1.5~10 sec.Every Long Push changes the dimming direction, dimming up or down
Reset>11 sec,Set up the dimming level to 100%

●The factory default dimming level is at 100%.

●Ilfthe push action lasts less than 0.05 sec, it will not lead to a change for the status of the driver.

●Up to 10 drivers can perform the PUSH dimming at the same time when tilzing one common push button.

●The maximum length of the cable from the push button to the last driver is 20 meters.

●The additive push button can be connected only between the LS terminal, as displayed in the diagram,

and AC/L (in brown or black); it will lead to short circuit if it is connected to AC/N,

◎DALIinterface(primary side)

●Apply DALI signal between DA+ and DA-

●DALI protocol comprises 16 groups and 64 addresses.

●First step is fixed at 8% of rated output power.

NOTE: DALI, Push dimming can not be used in the same time!(The factory setting defaults to DA)


TEMPERATURE COMPENSATION OPERATION

LDC-80 have the built-in temperature compensation function; by connecting a temperature sensor (NTC resistor) between the +NTC/-NTC terminal of LDC-80 and the detecting point on the lighting system or the surrounding environment, output current of LDC-80 could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED.

◎LDC-80 can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected

through the IADJ. pin

◎NTC reference:

NTC resistanceOutput Current
<17.5KOutput current reduce as the resistance decreases
>17.5KNormal output current

Notes:

1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using resistor.

2. If new brand of NTC resistor is applied,please check the temperature curve first.

◎Dimming function of the driver will be invalid when the "temperature compensation" function is in use.


Zastosowania

LED panel lighting

Indoor LED lighting

Linear LED lighting


We are willing to actively participate in the ecological construction of the 50W UL TUV CCC CE Dimmable Constant Current LED Lighting Drivers with SCP Ocp Ovp Otp industry and promote the healthy development and sustainable progress of the industry. We actively adjust the development strategy and marketing mode of the enterprise, expand the domestic market at the same time, and constantly increase the development of international market business. Our long-term goal is to promote the development of the concept of caring for society in the whole industry.

Hot Tags: meanwell dimmable led driver, China meanwell dimmable led driver manufacturers, suppliers, factory, oświetlenie półek w szafce, wysokiej jakości taśma LED, akrylowe panele sufitowe, P10 Single Color LED Module, litery kanałowe z podświetleniem krawędziowym, Taśma LED

Produkty powiązane